- Support Area
Small, light and efficient: the PipeCheck plus mobile measuring device by LANCIER Monitoring is used for inspecting existing or newly installed measurement sections in district heating pipeline monitoring.
Intuitive operation using just three keys. The illuminated, glare-free LC display can also be easily read in difficult lighting conditions. A battery-saving LED torch is integrated into the device for working in dark areas.
The PipeCheck plus identifies the MH level, as well as the insulation and loop resistance. By reversing the polarity of the metering voltage automatically, the interference from the element potential is eliminated and so a typical measurement error is avoided.
The PipeCheck plus recognises the following faults:
• pipe leakage,
• breaks in the measurement section,
• pipe connection fault,
• contact of a sensing wire with the media pipe
and detects the fault location as well as the length of the loop (for NiCr only).
All measurements are stored on a replaceable memory card with a georeferenced time-stamp (via internal GPS module) for later post-processing on the PC. Route memos help to identify and evaluate particular measuring spots.
The battery-operated measuring device is equipped with a USB port for easy data transfer.
The PipeCheck plus is supplied in a handy shock-proof carry case.
|Hand-held measuring device PipeCheck plus|
for district heating pipe sensors
|including outdoor box and accessory kit comprising:|
1 charging cable with plug for use in cars, 2 test tips, 2 large alligator clips, 1 test plug (1.1 MΩ / 5.8 kΩ, fault 0.1 % of m. v. each), 2 spring clips, 1 replacement magnet, 1 pipe connector mount, 1 pipe connection extension cable, 1 replacement SD memory card
|Measurement range insulation||0 .. 100 MΩ |
(fault: ±1 % of m. v. for 0 .. 20 MΩ, ±3 % of m. v. for > 20 MΩ ±1 Digit)
|Resolution insulation||0.1 kΩ|
|Measurement range loop||0 .. 50 kΩ |
(fault: ±1 % of measured value ±10 Ω absolute ±1 Digit)
|Resolution loop||0.1 Ω (Cu)|
|Pipe length||NiCr: max. 2500 m (1m = 5,8 Ω)|
HDW / Cu (Nordic System): max. 4000 m
|Pipe contact control||yes|
|Measuring voltage||<= 24 V DC and < 100 mA (according to EN 14419)|
|Display||LC display, monochrome grey, glare-free|
|Power supply||Li-Ion rechargeable battery, operating duration 10 h typ.|
|Features||• Location tracking by GPS module|
• SD memory card (max. 2 GB, FAT 16)
• Integrated LED torch
• USB port
• Battery status display
|Operating temperature||-10 .. +50 °C|
|Admissible humidity||0 .. 95 % rel. humidity, non condensing|
|Dimensions (l / w / h)||approx. 221 / 106 / 35 mm|
|Weight, including case and accessories||approx. 1.55 kg (without outdoor box)|