FMA 200C
Digital Flowmeter
The FMA 200C is a highly accurate and reliable instrument to monitor pressurized cables. It may be used as a local measuring device or as an adressable sensor within the LANCIER monitoring system. The airflow measurement is pressure-independent at a range of 0 - 200 l/h. Actual values are shown at the 3 digit LC-display with a resolution of 1 l/h. The FMA 200C signalises the exceeding of programmed thresholds by means of a signal LED and the closing of an alarm relay contact. A built-in key is used to acknowledge the local signal.
The distribution block with integrated electrical and pneumatical bus system can house up to five FMA 200C without the need of costly connectors. Old LANCIER distribution blocks with mechanical flow meters can be conveniently replaced one-to-one.
Ordering Data
| Digital Flowmeter FMA 200C Module with display and keys. Signal output via dry contacts | Order-no. 064952.100 |
| Distribution block for 1-5 FMA 200C | Order-no. 064950.000 |
| Blindplate for FMA-block | Order-no. 064954.000 |
| 19" installation kit for one distribution block (for installation into 19" wall-mount cabinets and front doors of RTS equipment) | Order-no. 064955.000 |
| Installation kit for the first distribution block (for replacement of flow indicators and expansions) | Order-no. 065897.000 |
| Pneumatic installation kit for one FMA 200C (Output connector for new RTS equipment, 19" wall-mount cabinets and expansions) | Order-no. 065898.000 |
| Common input air filter(for installation into PE 10/7 hose when connecting to cable type PWE2Y) | Order-no. 071011.000 |
| Micro air filter add-on kit for RTS 2802 (for installation of FMA 200C in RTS 2802) | Order-no. 071012.000 |
| Blindplate 19", 2.5 HU | Order-no. 064498.000 |
Technical Data
| Measuring range | 0 ... 200 l/h |
| Display resolution | 1 I/h |
| Max. measuring error | ±5 % FS, ±1 Digit at +20 °C |
| Max. temperature drift | ±0,15 % FS/°C |
| Operating pressure | 0 ... 1 bar |
| Operating voltage | 36 ... 72 V= / 2,5 VA |
| Operating temperature | 0 ... +50 °C |
| Storage temperature | -30 ... +80 °C |
| Admissible humidity | 0 .. 95 % rel. humidity, non-condensing |
| Signal output | dry contact, max. 100 V= / 0.1 A= |
| Remote reading | Tx-bus |
| Frequency range | 1000 Hz ... 2000 Hz |
| Resolution | 1 Hz 0,2 l/h |
| Dimensions Flowmeter (WxDxH) Manifold block (WxDxH) | 64,2 x 106,2 x 110,2 mm 322 x 150 x 110,2 mm |
| Weight Flowmeter Manifold block equipped with 5 flowmeters | approx. 0,18 kg approx. 1,80 kg |