RM-Tx

RM-Tx
Interface module to integrate addressablesensors into the Rail-Module-Bus

The Rail-Module-Bus from LANCIER Monitoring is a compact and robust sensor system.

Several measuring modules are mounted on a top-hat rail and are directly connected to one another by means of plug-in contacts. The supply voltage, data analysis and control panel as well as their transmission to the remote measuring stations are carried out via the RM-Basic module.

The RM-Tx interface module is used to integrate addressable Tx-Bus sensors into the RM-Bus system.

In the Tx-Bus, measured values are transmitted at low bandwidth over long distances via a copper monitoring pair. The operating range might cover more than 50 km depending on the quality of the used copper pair (refer to our product information ‘Tx-Bus - Mode of operation and planning rules’).

The thresholds for the individual sensors are set on the server side via the connected monitoring system.

 

Ordering Data

RM-Tx
Interface module to integrate addressable sensors into the Rail-Module-Bus


Order-no. 074005.000
RM-Basic
Power supply, communication and display module for the RM-Bus

Order-no. 074001.100

Technical Data

No. of measuring channels1 channel for up to 127 Tx-Bus sensors
Bus voltage UATX60 V
Current limiting typ.30 mA
Measuring range700 .. 2400 Hz
Input sensitivity≥ 35 dB typ. (600 Ω)
Supply voltage12 V / 5 V DC by RM-Basic module
DisplayMonochrome LC-Display by RM-Basic module
Power consumptionmax. 4 W
Input measuring line
   pulse strength 1.2/50 μs

1000 V
Signal LEDs per measuring channel
  BUS green / red: 

  STATE green / red: 

  DISPLAY blau:

red: Signals pending
green: Measuring channel activated
red: Measuring interval
green: Operation
Display operation
Operating temperature range-20 °C .. +65 °C
Admissible ambient humidity0 .. 95 % rel. humidity, non-condensing
Dimensions RM-Tx (H x B x T)89,7 x 72 x 62,2 mm
A maximum of 4 RM-Tx modules can be connected to 1 RM-Basic module.