FiberTxA-Mk2
Optical Fiber Attenuation Sensor
The FiberTxA-Mk2 is a stand-alone measurement and monitoring device for dark and active optical fibers. It contains a laser diode and a power meter. The FiberTxA-Mk2 uses a spare optical fiber as a measurement loop which is being measured continuously. The monitoring of a fiber between two stations is provided by the use of two fiberTxA. One is acting as a transmitter while the other acts as a receiver. The thresholds for the attenuation values are easily programmable with the built-in keys. The integrated display shows the measurement values and settings.
The sensor is equipped with dry output relay contacts to allow for remote alarming. Additionally it can be supplied with plug-in interface modules for the LANCIER Tx-Bus or CAN-Bus in order to integrate it into the Unified Monitoring System (UMS).
Ordering Data
FiberTxA-Mk2, Module with display and keys. Signal output via dry contacts. Fits into 19"- drawer (1 HU). | Order-no. 071840.0WA | |
W: Wavelength 1310 nm Multimode = 7 Wavelength 1310 nm Singlemode = 8 Wavelength 1625 nm Singlemode = 9 Other connectors upon request | A: Fiber Connector ST = 2 Fiber Connector SC/PC = 3 Fiber Connector DIN/PC = 4 Fiber Connector SC/APC = 5 Fiber Connector FC/APC = 6 Fiber Connector LC = 7 Fiber Connector E 2000 = 8 Fiber Connector FC/PC = 9 | |
Lancier Tx-Bus Interface, Internal plug-in module for connection to monitoring systems DW 1005E or DW 101E | Order-no. 071700.000 | |
CAN - Interface, Internal plug-in module for connection to RTU or Ethernet via CAN-Ethernet adaptor | Order-no. 072050.000 | |
Other interfaces (RS232, RS485) upon request | ||
CAN - Ethernet adaptor, External module for connection of several transducers to TMN / Lancier UMS via SNMP | Order-no. 072240.000 | |
Drawer 19" 1HU for max. three Mk2 sensors | Order-no. 071863.000 | |
Wall housing with power supply unit 48/60 V DC with power supply unit 115-230 V AC | Order-no. 072723.000 Order-no. 072723.008 | |
Power supply 115-230VAC / 48VDC complete | Order-no. 070257.000 |
Technical Data
Measurement range | -9,9 - 50 dB |
Resolution | 0,1 dB |
Supply voltage | 36 - 72 VDC |
Power consumption | 50 mA typ. |
Display | 3-digit, LCD |
Local User Interface | set threshold acknowledge alarm |
Signal LEDs | red: alarm yellow: acknowledged alarm green: display attenuation red: remote operation |
Max. switchable voltage / current | 100 V DC / 0,1 A DC |
Dimensions sensor | 40,3 x 129 x 167 mm |
Dimensions drawer | 42 x 484 x 278-353 mm (1HU/19") |