OpTxA-Mk2
Optical Power Sensor
The OpTxA-Mk2 is a stand-alone measurement and monitoring device for active optical fibers. It contains an integrated optical coupler and a power meter. The thresholds for the optical power values are easily programmable with the built-in keys. The integrated display shows the measurement values and settings.
The sensor is equipped with dry output relay contacts to allow for remote alarming. Additionally it can be supplied with plug-in interface modules for the LANCIER Tx-Bus or CAN-Bus in order to integrate it into the Unified Monitoring System (UMS). Especially when combined with an OTDR-based monitoring system (refer to RTU) an all-inclusive surveillance of dark and active fibers can be realised very economically.
Ordering Data
OptTxA-Mk2 A: | Order-no. 071850.00A |
Lancier Tx-Bus Interface Internal plug-in module for connection to monitoring systems DW 1005E or DW 101E | Order-no. 071700.000 |
CAN - Interface Internal plug-in module for connection to RTU or Ethernet via CAN-Ethernet adaptor | Order-no. 072050.000 |
Other interfaces (RS232, RS485) upon request | |
CAN - Ethernet adaptor External module for connection of several transducers to TMN / Lancier UMS via SNMP | Order-no. 072240.000 |
Drawer 19" 1HU for max. three Mk2 sensors | Order-no. 071863.000 |
Technical Data
Measurement range | 10 .. -60 dBm |
Resolution | 0.1 dBm |
Optical Coupler | 90/10 %, integrated |
Supply voltage | 36 - 72 V DC |
Power consumption | 50 mA typ. |
Display | 3-digit, LCD |
Signal LEDs | Red: Alarm Yellow: Acknowledged alarm Green: Display attenuation Red: Remote operation |
Local User Interface | Set threshold Acknowledge alarm |
Signal outputs | Dry change-over contact |
Max. switchable voltage / current | 100 V DC / 0.1 A DC |
Dimensions sensor | 40.3 x 129 x 167 mm |
Dimensions drawer | 42 x 484 x 278-353 mm (1HU/19") |