CoverSensor with electrical switch
for building monitoring
The LANCIER CoverSensor has been specially developed for the monitoring of manhole covers and other building openings. Its self-contained design and the materials used have been engineered for use in harsh environments, such as those found in manhole structures. Without external function-determining elements, it is particularly insensitive to manipulation, corrosion and wear.
The CoverSensor (1) is mounted on a slide (2) under spring tension. It is screwed firmly to a manhole wall, for example, so that it touches the manhole cover (3) at a ferromagnetic point. The spring-loaded slide is pretensioned to compensate for tilting movements of the manhole cover. Mounting on doors and other building openings is similar.
For monitoring, an internal dry contact is read out by means of a two-wire measuring cable (4).
When the manhole cover/door is opened, the switching state of the changeover contact changes, whereby the affected building opening is detected and reported by the LANCIER monitoring system.
The alarm is triggered decentrally via relay outputs or via Modbus to a remote control system or via IP network to the universal monitoring platform UMS.
Black box principle
The sensor has no moving external function determining elements and is therefore insensitive to manipulation, corrosion and wear.
Ordering Data
| CoverSensor with electrical switch for building monitoring | Order-no. 075694.010 |
| Monitoring units RM-Basic Supply, communication and display module for the RM-Bus | |
| RM-Loop Loop resistance measuring module, 2-channels | Order-no. 074008.100 |
Technical Data
| Connection cable length | 5 m, others on request |
| Signal output contact | dry changeover contact |
| Housing material | impact resistant polyethylene |
| Housing protection class | IP 68 |
| Operating temperature | -20 .. +75 °C |
| Housing dimensions | 300 x 135 x 50 mm (H x W x D) |