LID-TxA-S
Adressable RKA Light Detector
The RKA light detector LID-TxA-S interprets optical signals of a shortcut direction indicator (RKA) (e. g. RKA 1.1 of Horstmann, www.horstmanngmbh.com) which is connected to it by means of a plastic fiber optic cable.
The LID-TxA-S differentiates between:
- red flashing source
- green flashing source (a short red reference flash preceeds the green flash)
- source does not post
The sensor transduces thedetected state into an output frequency and transmits it to the LANCIER monitoring system by means of the Tx-bus. The detector’s LEDs indicate the transmitted state at the sametime.
Ordering Data
| Light detector LID-TxA-S | Order-no. 072203.000 |
| Accessory Top hat rail for 5 snap-on housings, length 125 mm | Order-no. 041444.000 |
Technical Data
| Supply voltage | 20 - 120 V DC |
| Nominal current | 4,2 mA typical |
| Quiescent current (at 60V supply voltage) | 150 μA typical |
| Time window (Addresse) | 1 |
| Cycle time / Addresse | 2 s |
| Transmission time | 1,5 s |
| Deviation of transmission time | < 100 ms |
| Reset time | < 200 ms |
| Mechanical interface via plastic fiber optic cable | external diameter 2.2 mm internal diameter of core 1.0 mm max. cable length 20 m, corresponding to an attenuation of < 3 dB bending radius must be > 50 mm |
| Operating temperature | -10..+60 °C |
| Storing temperature | -20..+80 °C |
| Dimension (H x W x L) | 105 x 22,5 x 75 mm |
| Weight | approx. 100 g |
We are member:
