Skip to main navigation Skip to main content Skip to page footer

LAM 2000

Mobile Pressurisation System

The mobile pressurisation system LAM 2000 is the followup model of the proven LAM 2500. It is designed as a back-up system for stationary pressurisation systems during breakdowns e.g. due to repair or maintenance works.

Because of its revolutionary new two parts design with a control/dryer and a compressor module the LAM 2000 changed from a mobile system to a portable system. Only a few operations suffice to devide it into two modules which weigh less than 30 respectively 25 kg. Handles ease the transport.

The new display and control unit offers a lot more comfort to the user: faults, tendencies of the relative humidity of output air, operating hours and remaining time until the next service are available at a glance now.

Ordering Data

Pressurization System LAM 2000 with 3 m electrical and pneumatical supplies each, without condensate surge tank Order-no. 073139.000

Technical Data

Output power approx. 2000 Nl/h
Number of consumer load connection point 1
Operating voltage 230 V, +6% -10%, 50 Hz
Current consumption of compressor approx. 3,5 A
Working pressure of compressor max. 6,0 bar
Opening pressure safety valve „compressor“    7,0 bar ± 10 %
Working pressure On-Off 3,0 to 5,5 bar
Opening pressure safety valve „high-pressure“ 7,0 bar
Output pressure 0,5 bar, other on request
Opening pressure safety valve „cable pressure“ 0,7 bar ± 10 %
Relative humidity output air (typical) < 1,5 %
Content of air storage tank 10 l
Ambient temperature limit +1 °C to +40 °C
Ambient humidity limit 0 .. 90 % rel. humidity, non condensing
Signal-LEDs Operation (DC), Humidity (F), Fault (A), Servicing (W)
Signal output (floating) Fault (Humidity, Running time) (A)
Workplace-related emission value 74 dB(A), Measurement uncertainty ± 2,3 dB(A)
Measuring system DIN 45635 section 1, in the room
Dimensions (Width x Depth x Height) 450 x 355 x 980 mm
Weight approx. 53 kg (Dryermodule 24 kg, Compressormodule 29 kg)